|
 |
|
 |
|
 |
High Performance Parts:
Page 2
200976: Xtreme 117 cc Stroker Kit: A Value Priced, High Quality Stroker Kit which includes a balanced crank with race rod, Race Head, Genuine VM26 Mikuni® carb and matching intake, High compression piston, Chrome rings, Piston pin and clips Also includes Gaskets and other components to complete assembly. Turns your 50, 70 or 90 cc Xtreme into a 117cc screamer. Can be used on Xtreme 50, 70 and 90 Pit Pro engines as well as HONDA® CRF~XR50/70© (case boring is required on some Xtreme and HONDA® engines). We recommend that you install this kit with improved ignition, transmission, clutch components as well as an oil cooler. Pistons, Rings and gaskets are available as replacement component, separate from the kit. IMPORTANT NOTE: This kit HAS NOT been tested with the electric starter, We do not believe that this kit will work with the electric start. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger picture)
200345 or 200345R: 54 mm Big Bore, High Compression Piston Kit: Makes your 50, 70, 90, 107 or 125 bigger the easy way. On the CR2/3 this Kit Replaces our 200131 Piston Kit. This Piston requires a 200332 cylinder on the 50 or 70, the 200342 cylinder for use on 90 or 107. On CR2 & 3 your cylinder must be bored to 54mm to fit this piston. Let us know which head you use so that we can get you the correct notch pattern, the "R" piston fits our race head. IMPORTANT NOTE: Engine builder must check the piston to valve clearance on your particular engine to assure that the valves do not get too close to the piston as the engine rotates. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger image)
200396: 52.4 mm High Compression Piston Kit: For "C" Series Engines with w/13mm piston pin. Fits 107/125 cc XTREME engines as well as other Chinese Engines. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger image)
200341B: Magnetic Drain Plug: Catches and Holds All the ferrous Metallic Trash that floats around in the oil of your Pit Pro or other "C" series Engine. Protect your expensive engines components from metallic particles in the oil. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger image)
200953A: Manual Clutch Conversion Kit: This Kit will convert your Auto-Clutch TYPHOON70 or 90 to a full Manual Clutch. Kit includes a Heavy Duty 3 plate clutch, cble, lever and lever bracket. Cables, levers and parts are available individually as needed. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger image)
200961: HEAVY DUTY AUTO Clutch Upgrade: This Kit is a 3 plate Heavy Duty Version of the Automatic Clutch in some XTREME Machines. Fits many HONDA ® "C" Series Engines as well. Great for High torque or other modified Engines. (Please Note that the contents or packaging of the actual kit may vary slightly from this picture)
 (click HERE for larger image)
Go To Page # Page # 1 Page # 2
|
 |
|
 |
|
|
